![]() |
Which Foam Coating For Me? |
|||||
Coating |
Clean Up |
Brush On |
Spray On |
Surface |
Coating Desc |
Foam-Crete |
Water |
Yes |
Yes Hopper Spray Gun |
Spray On=Smooth Brush On=Some Texture |
Dries Lt Grey in 6 Hours. Cures Overnight. Gives Amazing Super Strong Coating. Comes as a powder. Mix with Water and Included Polymer. Must Use what you mix in about an Hour. |
Foam Shield II |
Water |
Yes |
Yes Hopper Spray Gun |
Some Texture. |
Dries Med Gray in 12 Hours. 2 Coats gives very Hary Surface. Has Textured Surface. Premixed - Ready to Use. |
Aqua-Gem |
Water |
Yes |
Yes Presure Spray Gun ($95.00) |
Smooth |
Water Based Epoxy Plastic Foam Coating. The more coats the stronger. We spray 5 coats with the Gun. One every 30 Mins. 24 hour Cure Time. 2 Part Mix. Can Use Epoxy Thickener |
Dino-Goo |
Water |
Trowl On |
No |
As you Make it |
This is a water based epoxy foam coating. Looks like peanut butter. Trowl on and shape anyway you want. Smooths out with water. 2 Part Mix |
EZ - Sculpt |
Water |
Trowl On Press On |
No |
As you Make it |
This is a water based epoxy foam coating. Looks like Clay. Press on and shape anyway you want, just like clay. Smooths out with water. 2 Part Mix Rock Hard Coating in 24 Hours. |
Foam Poly Urea Coat |
MEK |
Yes |
Yes |
Smooth |
Polyurea foam coating. 2 Part Mix. This can be brushed on your Foam Art. With 2 layers it produces a resonably hard elastomeric coating. Cures in a few hours. Cures with Humidity. |
Spray Poly Cartridge |
MEK |
No |
Slight Texture |
This is a Dual componet Cartridge System that sprays only thru the gun. For Professional Foam Art Coating Use. Plastic Cure Time 20 Mins. Paint time in an Hour. | |